How to read an oil and gas royalty statement
Your check stub (the "revenue statement") shows, for each well, product and month, how much was sold, for how much, what came off the top, and your share. Here is what each column means and the checks worth running.
The columns, left to right
- Property or well and production month. The lease or well name, often with the operator's own property number, and the month the oil or gas was produced. That month is usually two or three months before the check date.
- Product. Oil, gas, NGL (natural gas liquids) or condensate, each on its own line.
- Volume. Barrels for oil and NGL, mcf (thousand cubic feet) or MMBtu for gas. It is the whole lease or unit's sales for the month, not your share.
- Price. What the oil or gas sold for, per unit. It is usually below the benchmark price (WTI for oil, Henry Hub for gas) after quality and transport.
- Gross value. Volume times price.
- Taxes. State production (severance) tax. In Texas: 4.6% of oil value plus a clean-up fee of 5/8 cent a barrel; 7.5% of gas value plus 1/15 cent per mcf.
- Deductions. Gathering, compression, treating, processing and transport. Whether they may come out of a royalty depends on your lease's royalty clause.
- Net value. Gross value minus taxes and deductions, for the whole lease.
- Your decimal (owner decimal or revenue interest). Your fraction of the lease's revenue, such as 0.00125. For a royalty it is usually your net mineral acres divided by the acres in the tract or unit, times the lease royalty.
- Your net. Your decimal times the net value: the money that is yours from that line.
Five checks you can run
- Volume times price should equal the gross value, within a few cents.
- Gross minus taxes minus deductions should equal the net value. A gap usually means a deduction that isn't listed.
- Your decimal times the net value should equal your net. If it is about 10, 100 or 1,000 times off, a decimal point probably moved.
- Your decimal should be the same on every line for the same well and product, unless the title or division order changed.
- A royalty decimal can never be more than the lease royalty itself (for example 0.125 on a 1/8 lease).
Run these checks on your statement (free; nothing you type leaves your device).
Your decimal and the division order
The operator sets your decimal in a division order, the paper that lists each owner's share of a well or unit. If your decimal looks off, ask the payor for the division order and how they worked it out. The statement checker's decimal calculator works out what your decimal should be from your net mineral acres, the tract or unit acres and your lease royalty.
When you get paid in Texas
Under Texas Natural Resources Code section 91.402, a payor may hold royalty under $100 for up to 12 months, and under $10 until production stops unless you ask in writing for a yearly check. If you ask in writing, you are paid monthly once you are owed more than $25.
See your lease's production
For a Texas lease you can compare the volumes on your stub with what the operator reported to the Railroad Commission: find your lease and open its page.